Dental Implant Handpiece of 20: 1 Contra Angle

Product Description

Dental Implant Handpiece of 20:1 Contra Angle 

1	Chuck type:	Chuck type: Button type
2	Bur applicable:	2.345~2.355mm
3	Spray:	External irrigation system

Max torque 55Ncm
Ergonomic comfort grip
20: 1 gear ratio
Available for various E type motors in accordance with ISO standard
Compatible with all E-type motors (NSK, Aseptico, W&H Nouvag, Acteon)
Dental handpieces right use way:
1. The need to use a clean , dry , oil-free air compressors for medical use ;
2. The air pressure between 2.3-2.8kgf / cm2;
3. Place the adapter with quick connector at the bottom of a combination of dental handpieces , and confirm that the card lock fixed ;
4. Press the pedal , handpiece operation and examine whether the normal operation of the spray head . If everything is normal, you can start using the handpiece.
After each patient use , maintenance should be done as follows
1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate ;
2. Use a metal needle to clean the spray holes and fumaroles ;
Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle.
3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes ) ;
4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom ;
5. The handpiece with quick connector combination ( first determine the water switch is turned off )
6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie ) ;
7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain ;
8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization.






Payment:
1. Full payment should be made within 5 working days of placing your order.
2. After deliver goods, we will send the tracking number to you.
3. We accept Paypal, Western union and bank transfer.
4. Please make sure your payment address is correct.
5. In order to ensure you received your order tax free upon import, we will declare it with a lower value, the lower price does not reflect the total price you paid or the market value of the products and may not apply to countries with different tariff rules. Buyer is responsible for any tax/ duty charged by their country.
Shipment:
1. Items will be shipped ASAP after payment is received in 5 working days or more sooner
2. A tracking No. Will be send to your e-mail after your order has been shipped
3. Delivery time: 3-5 working days by UPS/ DHL/TNT/ FEDEX, 5-7 working days by EMS, 7-25 working days by China Post Air Mail.

Our company has strict control on products quality,partners&lqquot& selection.All of our products are popular in Europe, America,Middle East,Asia Area more than 50 different countries and areas.While developing long and lasting cooperation
with many big companies in these areas,we are seeking for more new partners from all over the world. If  you  need  any
dental products,don't forget to give us enquiry,we will discuss further on our mutual beneficial cooperation.
Our main products are dental unit,air compressor,autoclave,X ray unit,ultrasonic scaler,light cure,air turbine handpiece, intra-oral camera and apex locator.
Meanwhile we can supply branded products from Dentsply,
Saeshin,Saeyang,NSK,Woodpecker,Vita,Meta,Coxo,Greatstar,BEING,SINOL,RUNYES,GAPADENT, SUPLINE,
SMIC and so on.