New 20: 1 Dental Implant Contra-Anlge Low Speed Handpiece with LED Light

• Certification: ISO, CE
• Material: Aluminum
• Light Way: With LED Light
• Number of Holes: Four Holes
• Operation Air Pressure: 2.5-3MPa
• Supply Voltage: 3.0-3.8V
• Model NO.: SD-H214
• Grip Power: 25-45n
• Atomization Pressure: Under 5.00MPa
• Interface: 4 Holes
• Teeth Whitening Method: Cold Light Whitening
• Applicable Departments: Oral Rehabilitation Department
• Type: Dental Handpiece
• Transport Package: Standard Exported Carton
• Specification: ISO/CE
• Trademark: Stardent
• Origin: China
• HS Code: 90184990
• Production Capacity: 10000/Month

Product Description

20: 1 LED Light Implant Dental Handpiece SD-H214

Chuck type: Button type

Bur applicable: 2.345~2.355mm

Spray: External irrigation system

Provides sufficient force at low speed

Max torque 55Ncm

Ergonomic comfort grip

20: 1 gear ratio

Available for various E type motors in accordance with ISO standard
Compatible with all E-type motors (NSK, Aseptico, W&H Nouvag, Acteon)

Dental handpieces right use way:
1. The need to use a clean , dry , oil-free air compressors for medical use ;
2. The air pressure between 2.3-2.8kgf / cm2;
3. Place the adapter with quick connector at the bottom of a combination of dental handpieces , and confirm that the card lock fixed ;
4. Press the pedal , handpiece operation and examine whether the normal operation of the spray head . If everything is normal, you can start using the handpiece.
After each patient use , maintenance should be done as follows
1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate ;
2. Use a metal needle to clean the spray holes and fumaroles ;
Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle.
3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes ) ;
4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom ;
5. The handpiece with quick connector combination ( first determine the water switch is turned off )
6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie ) ;
7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain ;
8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization.

Stardent Equipment Co.,Limited is located in Foshan,Famous Town of Chinese Gongfu,central area of China, a traditional commerce city with rich history and culture.  

Since 2008,our company has been focusing on dental products export,including dental equipments and materials,dental cultural products and electrical products and so on.We believe that quality of products and service are the lifeline of enterprise.Our company has strict control on products quality,partners&lqquot& selection.All of our products are popular in Europe,America,Middle East,Asia Area more than 50 different countries and areas.While developing long and lasting cooperation with many big companies in these areas,we are seeking for more new partners from all over the world.If you need any dental products,don&lqquot&t forget to give us enquiry,we will discuss further on our mutual beneficial cooperation.

Our main products are dental unit,air compressor,autoclave,X ray unit,ultrasonic scaler,light cure,air turbine handpiece,intra-oral camera and apex locator.Meanwhile we can supply branded products from Dentsply,,Saeshin,Saeyang,NSK,Woodpecker,Vita,Meta,Coxo,Greatstar,BEING,SINOL,RUNYES,GAPADENT, SUPLINE,SMIC and so on.

"For your better clinic,for all better teeth,for most beautiful smile" is our goal of developing.Welcome to visit website or company to know more.Thanks very much.